top of page

Engine Fuel Pump Actuator 3044190 for Diesel Generator || Gen Part Web

lautokaoffice

Are you searching for Engine Fuel Pump Actuator 3044190 for Diesel Generator: Gen Part Web: A Global Online distributor of Automobile Accessories & Parts, Diesel and Gas Generator Sets. You can purchase Cheaper Electronic parts. Hot Selling and Fast Shipping.


ENGINE FUEL PUMP ACTUATOR 3044190

Operation

Governing Mode: Isochronous to 5% droop Steady-State Stability: ±1/4% Operating Input Frequency Range: 1K to 5K Hz Idle Frequency Range: 200 to 2200 Hz Response Time of Actuator: 15 milliseconds

Power

These are the power characteristics of Engine Fuel Pump Actuator 3044190

Operating Voltage: 12 Volts D.C. ±3 Volts or 24 Volts D.C.±6 Volts Continuous Ground Polarity: Negative ground (case isolated) Power Consumption (Maximum): 94 Watts (12 or 24 Volts D.C.) Nominal Operating Current: 1.3 amps at 24 volts Nominal Operating Current: 2.6 amps at 12 volts Maximum Operating Current: 3.9 amps at 24 volts Maximum Operating Current: 7.8 amps at 12 volts

Environmental

Ambient Operating Temp.: -40℃ to 185°F [-40℃ to 85℃] Maximum Temp. Drift: ±1@ - 40℃ to 185°F[- 40℃ to 85℃] Relative Humidity: 0 to 100% non Condensing

Physical-Remote Control

Dimensions: 5.75 in. x 4.44 in. x 2.15 in. (146mm x 113mm x 55mm) Weight: 2 lbs. [.9 kg] Mounting: Any position, typically in an enclosure Case Material: Die-cast aluminum

Panel Mounted Control

Dimensions: 5.5 in. x 4.1 in. x 1.3 in. (140mm x104mm x 33mm) Weight:1 lb. [.45 kg] Mounting:16 pin plug-in receptacle

Protection Features

High voltage protection (15 VDC for 12 volts or 32 VDC for 24 volts continuous) The reverse of supply polarity of Engine Fuel Pump Actuator 3044190 Surge protection (80 VDC, 10 msec transient)

Vibration Protection

(Remote Control) Entire printed circuit board sealed with Silicone-filled Epoxy. (Panel Mounted Control) Circuit board sealed with Silicone Epoxy.

Magnetic Pickup Specifications

Thread Size: 5/8 - 18 UNF-2A Tap Drill Size: 37/64 inch Proximity to Gear Teeth: 028 in. min, - .042 in. max. (Approximately 1/2 to 3/4 turn) Temperature Range:-67° to 220°F [- 55° to 105°C] Output at Cranking Speed:1.5 volts AC minimum Maximum Output: 30 volts AC Coil Resistance: 300 ohms maximum

For more products, please check this: Electric Valve Linear Speed Governor Actuator

1 view0 comments

Commentaires


bottom of page